Precautions
• This instruction reads clock data and stores those to a specified device even if a wrong clock data is set to the CPU module
(example: Feb. 30th). When setting clock data with the DATEWR instruction or GX Developer, make sure to set a correct
data.
• Time error of reading a clock data of millisecond is a maximum of 2ms. (Difference between the data memorized by clock
element inside of the CPU module and the data read by this function.)
• Specifying digit for the bit device can be used only when the following conditions are met.
• Digit specification: K4
• Head of device: multiple of 16
When the above conditions are not met, INSTRCT CODE ERR. (error code: 4004) will occur.
7 APPLICATION INSTRUCTIONS
7.16 Expansion Clock Instructions
7
711