Mitsubishi Electric MELSEC-Q/L Programming Manual page 456

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

Operation error

• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.

Error details

The value in the device specified by the instruction exceeds the setting

Program example

• The sample program calculates the added data and horizontal parity of six points of data starting from D0 and stores the

results in the devices specified by D100 and D101.

[Ladder Mode]

7 APPLICATION INSTRUCTIONS

7.5 Data Processing Instructions