Mitsubishi Electric MELSEC-Q/L Programming Manual page 937

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

*1 Can be used only for the Q03UDCPU, Q04UDHCPU, and Q06UDHCPU whose first five digits of serial number is "10012" or later.

*2 Can be used only for the Q03UD(E)CPU, Q04UD(E)HCPU, Q06UD(E)HCPU, Q13UD(E)HCPU, and Q26UD(E)HCPU whose first five

digits of serial number is "10102" or later.

For the instructions for which a rising edge instruction (P) is not described, the processing time is the same

as an ON execution instruction.

(Example) MOVP instruction, WANDP instruction etc.

Appendix 1 Operation Processing Time