Batch Reset Of Bit Devices - Mitsubishi Electric MELSEC-Q/L Programming Manual

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

Batch reset of bit devices

(D): Head number of the devices to be reset (bits)

Number of the devices to be reset (BIN 16 bits)

Internal device

Processing details

• Resets bit device n-points from the bit device designated by (D).

Annunciator (F)

Bit devices other than the

• If the designated device is OFF, the device status will not change.

Operation error

• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.

Error details

The points specified in n exceed those of the corresponding device specified

7 APPLICATION INSTRUCTIONS

7.4 Bit Processing Instructions

Redundant Universal

• Turns device n-points from annunciator (F) number designated by (D) OFF.

• Deletes annunciator number turned OFF from SD64 to SD79 and compresses remaining data forward.

• Stores number of annunciators stored from SD64 to SD79 at SD63.

• Sets the current value n-points from timer (T) or counter c designated by (C) to 0, and turns coil contact OFF.

• Turns OFF coil or contact n-points from the device designated by (D).