Mitsubishi Electric MELSEC-Q/L Programming Manual page 317

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

Program example

• The following program exchanges the present value of T0 with the contents of D0 when X8 goes ON.

[Ladder Mode]

• The following program exchanges the contents of D0 with the data from M16 to M31 when X10 goes ON.

[Ladder Mode]

• The following program exchanges the contents of D0 and D1 with the data at M16 to M47 when X10 goes ON.

[Ladder Mode]

• The following program exchanges the contents of D0 and D1 with those of D9 and D10 when M0 goes ON.

[Ladder Mode]

6 BASIC INSTRUCTIONS

6.4 Data Transfer Instructions