Steering Assembly, Exploded View - Polaris A09BG50AA User Manual

BODY / STEERING / SUSPENSION

STEERING ASSEMBLY, EXPLODED VIEW

Apply Loctitet 242 to
the bolt threads.
Steering Post
Right Hand Tie
Rod End Positioned
Between Steering
Post Arms
1
30 ft. lbs.
41 Nm)
Always use new bolts
1
upon reassembly
5.4
NOTE:
To avoid damage to tie rods and other steering
components, be sure to install tie rod end bolts in the
proper direction. The steering post arm bolt (B) points up;
the rod end bolts (A) point down. Be sure inner rod ends
are positioned properly. The right inner rod end must be
25-30 ft. lbs.
placed between the steering post arms. The left inner rod
(35-41 Nm)
end must be below the lower arm as shown.
Steering Post
Arm (Frog)
Left Hand Tie
Rod End
Positioned
Below Steer-
ing Post Arms
B
30 ft. lbs.
41 Nm)
25 ft. lbs.
(35 Nm)
Always use new cotter pins upon
2
reassembly. Install w/ open end to-
12-14 ft. lbs.
(17-17 Nm)
A
1
2
ward rear of machine.
40-45 ft. lbs.
54-61 Nm)
2
8 ft. lbs.
(11 Nm)