O Modules; Special Modules; 750-636 [Dc Drive Controller]; View - WAGO -I/O-SYSTEM 750 Manual

8 •

750-636 [DC Drive Controller]

View

2 I/O Modules

2.1 Special Modules

2.1.1 750-636 [DC Drive Controller]
2.1.1.1 View
Status
Fig. 2.1.1-1: View
2.1.1.2

Description

The 750-636 DC Drive Controller provides DC collector motors with a
nominal current of up to 5 A and an inrush current of 15 A max. The bi-
directional control of the DC motor is executed via short circuit -proof and
temperature-monitored H-bridge.
In addition to basic move commands (MovePos, MoveNeg), automatic
positioning may be optimized for different applications via different functions
and parameters. Both switched operation and soft-start/stop or current
reduction are possible through PWM control.
The 750-636 DC Drive Controller provides inputs A and B with the
connection of an incremental encoder, two digital 24 V inputs E+ and E- for
the connection of limit switches as well as the digital P input for a preset
signal.
24 V DC motors can be connected via outputs A+ and A-.
The limit switches automatically disable the motor output.
A green LED indicates the switching status for the digital inputs and the
power supply status.
Two yellow LEDs and a red LED indicate the operating mode and errors.
13 14
E+ E-
E+
A B
A
P
P
A+ A-
A+
750-636
Data contacts
E+, E-
E-
+24 V
A
B
B
P
+24 V
A+ A-
M
A-
Power jumper contacts
g063600e
WAGO-I/O-SYSTEM 750
I/O-Modules