Process Image With Extended Status Information - WAGO -I/O-SYSTEM 750 Manual

2.1.1.8.4

Process Image with Extended Status Information

If the extended status information is enabled (C1.3 = 1), it should appear as
follows:
Offset
WAGO-I/O-SYSTEM 750
I/O-Modules
Input data
0 S0 Status byte S0
1 S1 Status byte S1
2 S2 Ext. status byte S2
3 S3 Ext. status byte S3
4 S4 Ext. status byte S4
5 S5 Ext. status byte S5
750-636 [DC Drive Controller]
Output data
C0 Control byte C0
C1 Control byte C1
Setpoint position
D0
(LSB)
D1 Setpoint position
D2 Setpoint position
Setpoint position
D3
(MSB)
• 21
Process Image