WAGO -I/O-SYSTEM 750 Manual page 14

14 • 750-636 [DC Drive Controller]
Technical Data
Module-Specific Data
Voltage supply
Current consumption
(system voltage 5 V DC)
Voltage via power jumper contacts
Low voltage switching threshold
Overvoltage switching threshold
Current consumption
(power jumper contacts 24 V DC)
Current via power jumper contacts max. 10 A
Electrical isolation
Data width, internal
Dimensions W x H* x D
(* from upper edge of rail)
Weight
Standards and directives (see section 2.2 in manual on coupler/controller)
EMC -Immunity to interference
EMC -Emission of interference
Approvals (see section 2.2 in manual on coupler/controller)
More Information
Detailed references to the approvals are listed in the document "Overview
Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM
ELECTRONICC Tools and Docs (Item-No.: 0888-0412)
or in the internet under:
www.wago.com
System Description
typ.
typ.
typ.
typ.
UL (UL508)
C US
Conformity marking
Documentation
Via system voltage internal bus (5 V DC) and
power jumper contacts (24 V DC)
50 mA
DC 20 V ... 28 V
Low voltage/overvoltage are monitored
DC 19 V
DC 29 V
25 mA + load
500 V system voltage/field level
(power jumper contacts)
1 x 32 bits data, 2 x 8 bits control/status
12 mm x 64 mm x 100 mm
Approx. 70 g
Acc. to EN 61131-2 (2003)
Acc. to EN 61131-3 (2003)
WAGO-I/O-SYSTEM 750
WAGO-I/O-SYSTEM 750
I/O-Modules