1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Single board computers
  5. WSB-PV-D4251
  6. User manual

Figure 4-8: Sata Drive Cable Connection - IEI Technology WSB-PV-D4251 User Manual

Full-size picmg 1.0 intel atom processor d525/d425 ddr3 up to 4gb, vga/ldvs, dual pcie gbe four rs-232 ports, three sata 3gb/s ports seven usb 2.0, rohs, audio
Hide thumbs
Table of Contents

Advertisement

Step 1:
Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2:
Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector. See Figure 4-8.

Figure 4-8: SATA Drive Cable Connection

Step 3:
Connect the cable to the SATA disk. Connect the connector on the other end
of the cable to the connector at the back of the SATA drive. See Figure 4-9.
Step 4:
Connect the SATA power cable. Connect the SATA power connector to the
back of the SATA drive. See Figure 4-9.
Page 46
WSB-PV-D4251/D5251 SBC

Advertisement

Table of Contents
loading

Related Manuals for IEI Technology WSB-PV-D4251

Related Content for IEI Technology WSB-PV-D4251

This manual is also suitable for:

Wsb-pv-d5251

Table of Contents