Parallel Port Configuration; Bios Menu 12: Parallel Port Configuration Menu; Parallel Port [Enabled]; Change Settings [Auto] - IEI Technology WSB-PV-D4251 User Manual

Disabled
Enabled

5.3.6.4 Parallel Port Configuration

Use the Parallel Port Configuration menu (BIOS Menu 12) to configure the parallel port.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 12: Parallel Port Configuration Menu

Parallel Port [Enabled]

Use the Parallel Port option to enable or disable the parallel port.
Disabled
Enabled

Change Settings [Auto]

Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto
Page 72
Disable the IrDA port
Enable the IrDA port
D
EFAULT
[Enabled]
IO=378h; IRQ=7
[Auto]
[Printer Mode]
Disable the parallel port
Enable the parallel port
D
EFAULT
D The serial port IO port address and interrupt address
EFAULT
are automatically detected.
WSB-PV-D4251/D5251 SBC
Enable or Disable
Parallel Port (LPT/LPTE)
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit