Ps/2 Keyboard/Mouse Connection; Lan Connection (Single Connector); Figure 4-11: Ps/2 Connector - IEI Technology WSB-PV-D4251 User Manual

WSB-PV-D4251/D5251 SBC

4.8.1 PS/2 Keyboard/Mouse Connection

The WSB-PV-D4251/D5251 has a single PS/2 connector on the external peripheral
interface panel. The PS/2 connector is connected to a keyboard/Mouse. To connect a
keyboard/Mouse to the WSB-PV-D4251/D5251, please follow the instructions below.
Step 1: Locate the PS/2 connector. The location of the PS/2 connector is shown in
Chapter 3.
Step 2: Align the PS/2 connector. Align the PS/2 connector on the keyboard/Mouse
cable with the PS/2 connector on the external peripheral interface.
Step 3: Insert the PS/2
connector from the keyboard/Mouse into the PS/2 connector on the
WSB-PV-D4251/D5251. See Figure 4-11.

Figure 4-11: PS/2 Connector

4.8.2 LAN Connection (Single Connector)

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
connector. Once the connectors are properly, insert thePS/2
Page 49