Other Information; Using Ahci Mode Or Ali M5283 / Via Vt6421A Controller; B.5 O Ther I Nformation B.5.1 Using Ahci Mode Or Ali M5283 / Via Vt6421A Controller - IEI Technology WSB-PV-D4251 User Manual
Full-size picmg 1.0 intel atom processor d525/d425 ddr3 up to 4gb, vga/ldvs, dual pcie gbe four rs-232 ports, three sata 3gb/s ports seven usb 2.0, rohs, audio
Table of Contents
Advertisement
B.5 Other Information
B.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller
When the system uses AHCI mode or some specific SATA controllers such as ALi M5283
or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key
recovery. Please follow the steps below to install the SATA RAID/AHCI driver.
Step 1:
Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into
a USB floppy disk drive. The SATA RAID/AHCI driver must be especially
designed for the on-board SATA controller.
Step 2:
Connect the USB floppy disk drive to the system.
Step 3:
Insert the One Key Recovery CD into the system and boot the system from the
CD.
Step 4:
When launching the recovery tool, press <F6>.
Page 114
WSB-PV-D4251/D5251 SBC
Advertisement
Chapters
Table of Contents
