Figure 4-14: Sata Drive Cable Connection - IEI Technology WAFER-JL-N5105 User Manual

3.5" sbc with intel 10nm jasper lake celeron n5105 processor with dual displays, ddr4, triple intel 2.5 gbe, usb3.2, m.2, sata, com, soc, rohs

Hide thumbs Also See for WAFER-JL-N5105:

Table of Contents

Figure 4-14: SATA Drive Cable Connection

Step 3:

Connect the cable to the SATA disk. Connect the connector on the other end

of the cable to the connector at the back of the SATA drive.

Step 4:

To remove the SATA cable from the SATA connector, press the clip on the

connector at the end of the cable.

Page 58

WAFER-JL-N5105 SBC

Step 0:

Table of Contents

Wafer-jl-n5105-r10 167320