Serial Port N Configuration; Bios Menu 10: Serial Port N Configuration Menu; Serial Port [Enabled]; Change Settings [Auto] - IEI Technology WSB-PV-D4251 User Manual

WSB-PV-D4251/D5251 SBC

5.3.6.2 Serial Port n Configuration

Use the Serial Port n Configuration menu (BIOS Menu 10) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 10: Serial Port n Configuration Menu

Serial Port [Enabled]

Use the Serial Port option to enable or disable the serial port.
Disabled
Enabled

Change Settings [Auto]

Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto
IO=3F8h;
IRQ=4
IO=3F8h;
IRQ=3, 4
[Enabled]
IO=3F8h; IRQ=4
[Auto]
Disable the serial port
Enable the serial port
D
EFAULT
D The serial port IO port address and interrupt address
EFAULT
are automatically detected.
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ4
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ3, 4
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Page 67