The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
The clear CF card jumper settings are shown in Table 4-3.
Pin
Description
Short 1-2
Slave (Default)
Open 2-3
Master
Table 4-3: CF Card Jumper Settings
Figure 4-4: CF Card Jumper Location
4.5.3 LCD Panel Resolution Jumper
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The LVDS Panel Resolution jumper configures the resolution of the LVDS output. The
LVDS Panel Resolution jumper settings are shown in Table 4-4.
Pin
Open
Short 1-2
Short 3-4
Short 1-2, 3-4
Short 5-6
Short 1-2, 5-6
Short 3-4, 5-6
Short 1-2, 3-4, 5-6
Page 42
J_LCD_TYPE1
8-pin header
See Table 4-4
See Figure 4-5
Description
640 x 480 (18-bit)
800 x 600 (18-bit)
1024 x 768 (18-bit)
1024 x 768 (24-bit)
1024 x 768 (48-bit)
1280 x 1024 (48-bit)
1600 x 1200 (48-bit)
1280 x 768 (18-bit)
WSB-PV-D4251/D5251 SBC