Figure B-14: Select A Local Source Drive; Figure B-15: Select A Source Partition From Basic Drive - IEI Technology WSB-PV-D4251 User Manual

Figure B-14: Select a Local Source Drive

Step 6: Select a source partition (Part 1) from basic drive as shown in
Then click OK.

Figure B-15: Select a Source Partition from Basic Drive

Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called
( F igure B-16). Click Save. The factory default image will then be saved in the
7 7
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO.
Page 102
WSB-PV-D4251/D5251 SBC
F igure B-15.
7 7
iei