5.3.4 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 6) to change and/or set the configuration
of the IDE devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
PATA Master
PATA Slave
SATA Port0
SATA Port1
SATA Port2
ATA or IDE Configuration
Configure SATA As
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 6: IDE Configuration
ATA or IDE Configurations [Enhanced]
Use the ATA or IDE Configurations option to configure the ATA/IDE controller.
Disabled
Compatible
Enhanced
Page 62
Not Present
Not Present
Not Present
Not Present
Not Present
[Enhanced]
[IDE]
Disables the on-board ATA/IDE controller.
Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.
D
Configures the on-board ATA/IDE controller to be in
EFAULT
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
WSB-PV-D4251/D5251 SBC
Select ATA or IDE
configuration.
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
ESC
Exit