3.5" sbc supports 14nm 8th gen. intel core i7/i5/i3 or celeron on-board processor ult, 15w with ddr4 so-dimm, triple display by dual hdmi & lvds, m.2 a-key, pcie mini with msata, usb 3.2 gen 2 10gb/s, sata 6gb/s, dual com, audio and rohs (14 pages)
3.5" sbc with rockchip rk3588 processors, 8gb lpddr4x memory, 32gb emmc nand flash, single hdmi input and dual hdmi output, 2.5gbe lan, gbe lan, usb 3.2 gen 1, usb 2.0, 0 c 60 c and rohs (66 pages)
3.5" sbc supports 10nm 11th gen intel core i7/i5/i3 and celeron on-board soc with hdmi, dp, idpm, triple 2.5gbe lan, m.2, com, sata 6gb/s, usb 3.2 gen 2, iaudio, (16 pages)
Summary of Contents for IEI Technology WAFER-ULT-i1
Page 1
WAFER-ULT2-i1 Quick Installation Guide Version 1.11 March 2018 Package List WAFER-ULT-i1/WAFER-ULT2-i1 package includes the following items: 1 x WAFER-ULT-i1/WAFER-ULT2-i1 single board computer with enclosure heatsink 2 x SATA with 5V output cable kit 1 x Audio cable ...
Page 3
Display Output: Triple independent display VGA (up to 2560x1600@60Hz) 18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz) iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60 Hz) Ethernet: GbE1: Intel® I218LM PHY with Intel® AMT 9.0 support GbE2: Intel®...
Page 4
Digital I/O: 1 x 8-bit digital I/O (2x5 pin) Fan Connector: 1 x System smart fan (1x4 pin) Watchdog Timer: Software programmable, supports 1~255 sec. system reset Power Supply: 12V only DC input 1 x Internal power connector (2x2 pin) Support AT/ATX mode ...
Jumper Settings and Connectors LABEL FUNCTION J_ATX_AT1 AT/ATX mode select switch J_CMOS1 Clear CMOS button LVDS1 voltage selection LVDSBL_DC5V1 DC 5V jumper for LVDS backlight LVDS panel resolution selection FAN1 CPU fan connector DIO1 Digital I/O connector Internal DisplayPort connector AUDIO1 HD audio connector IPMI1...
Page 8
LABEL FUNCTION USB_CON1 External USB 3.0 ports COM1 External RS-232 serial port connector VGA1 VGA connector LVDSBL_DC5V1: DC 5V jumper for LVDS backlight PIN NO. DESCRIPTION Open By BIOS Setting (Default) Short 1 - 2 Locked to DC 5V LVDSBL_DC5V1:LVDS backlight to 5V DC PIN NO.
Need help?
Do you have a question about the WAFER-ULT-i1 and is the answer not in the manual?
Questions and answers