External Peripheral Interface Connection; Figure 4-10: Dual Usb Cable Connection - IEI Technology WSB-PV-D4251 User Manual

Step 3: Insert the cable
with the USB connectors on the WSB-PV-D4251/D5251, connect the cable
connectors to the on-board connectors. See Figure 4-10.

Figure 4-10: Dual USB Cable Connection

Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the

4.8 External Peripheral Interface Connection

Devices can be connected to the external connectors. To install external devices, follow
the directions in the subsections below.
Page 48
WSB-PV-D4251/D5251 SBC
connectors. Once the cable connectors are properly aligned
chassis.Step 0: