Create Factory Default Image; Figure B-10: Press F3 To Boot Into Recovery Mode; Figure B-11: Recovery Tool Menu - IEI Technology WSB-PV-D4251 User Manual
Full-size picmg 1.0 intel atom processor d525/d425 ddr3 up to 4gb, vga/ldvs, dual pcie gbe four rs-232 ports, three sata 3gb/s ports seven usb 2.0, rohs, audio
Table of Contents
Advertisement
B.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Step 1:
Turn on the system. When the following screen displays (
the <F3> key to access the recovery tool. The message will display for 10
seconds, please press F3 before the system boots into the operating system.
Figure B-10: Press F3 to Boot into Recovery Mode
Step 2:
The recovery tool menu appears. Type <4> and press <Enter>. (
Figure B-11: Recovery Tool Menu
Step 3:
The About Symantec Ghost window appears. Click OK button to continue.
Page 100
WSB-PV-D4251/D5251 SBC
F igure B-10), press
7 7
F igure B-11)
7 7
Advertisement
Chapters
Table of Contents
