Software Installation; Figure 4-14: Vga Connector - IEI Technology WSB-PV-D4251 User Manual

Figure 4-14: VGA Connector

Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.

4.9 Software Installation

All the drivers for the WSB-PV-D4251/D5251 are on the CD that came with the system. To
install the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-15).
Page 52
WSB-PV-D4251/D5251 SBC
Step 0: