Sata Drive Connection; Figure 4-7: Dual Rs-232 Cable Installation - IEI Technology WSB-PV-D4251 User Manual

WSB-PV-D4251/D5251 SBC
Step 1: Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 4-7. A key on the front of the cable connectors ensures the
connector can only be installed in one direction.

Figure 4-7: Dual RS-232 Cable Installation

Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis.

4.7.2 SATA Drive Connection

The WSB-PV-D4251/D5251 is shipped with two SATA drive cables. To connect the SATA
drives to the connectors, please follow the steps below.
Step 0:
Page 45