Factory Restore; Figure B-27: Restore Factory Default; Figure B-28: Recovery Complete Window - IEI Technology WSB-PV-D4251 User Manual

B.4.1 Factory Restore
To restore the factory default image, please follow the steps below.
Step 1: Type <1> and press <Enter> in the main menu.
Step 2: The Symantec Ghost window appears and starts to restore the factory default. A
factory default image called iei.GHO is created in the hidden Recovery partition.

Figure B-27: Restore Factory Default

Step 3: The screen is shown as in
reboot the system.

Figure B-28: Recovery Complete Window

Page 110
WSB-PV-D4251/D5251 SBC
F igure B-28 when completed. Press any key to
7 7