Usb Cable (Dual Port) With Slot Bracket; Figure 4-9: Sata Power Drive Connection - IEI Technology WSB-PV-D4251 User Manual

WSB-PV-D4251/D5251 SBC

Figure 4-9: SATA Power Drive Connection

4.7.3 USB Cable (Dual Port) with Slot Bracket

The WSB-PV-D4251/D5251 is shipped with a dual port USB 2.0 cable. To connect the
USB cable connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the WSB-PV-D4251/D5251 USB connector.
Page 47