WSB-PV-D4251/D5251 SBC
Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.
Disabled
Enabled
Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.
Disabled
Enabled
5.6 Security
Use the Security menu (BIOS Menu 20) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Main
Advanced
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password must be 3 to 20 characters long.
Administrator Password
User Password
Set User Password
Set Master Password
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 20: Security
Normal POST messages displayed
D
OEM Logo displayed instead of POST messages
EFAULT
D
Ignore all PXE Option ROMs
EFAULT
Load PXE Option ROMs.
Chipset
Boot
Security
Save & Exit
Set Setup Administrator
Password
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
ESC
Exit
Page 83