Sony MVS-8000X SystemMVS-7000X System User Manual page 239

• Settings for a particular input signal: "Signal input
settings" in Chapter 20 (Volume 2)
• Key fill bus settings: "Video Processing" (page 142)
• Settings for frame memory source buses 1 and 2:
"Setting video processing" (page 208)
• Settings for Aux 1 to 48 buses: "Making video process
settings for an AUX bus" (page 236)
• Overview of video process: "Video Process" (page 238)
This section describes an example on the background A
bus of the M/E-1 bank.
For the background B bus or utility bus 1 or 2, make the
adjustment with a similar procedure.
Making video process settings for each
bus
1
In the menu control block, press the top menu
selection button [M/E 1] and select VF7 'Misc' and
HF2 'Video Process.'
2
In the <Bkgd-A> group, press [Video Process],
turning it on.
3
Adjust the following parameters.
Knob Parameter Adjustment
1 Video Video signal
Gain gain
2 Y Gain Luminance
signal gain
3 C Gain Chrominance
signal gain
4 Hue Delay Hue delay
5 Black Black level
Level
To return the parameter settings to the defaults, press
[Unity] in the <Bkgd-A> group.
Setting values
–200.00 to
+200.00
–200.00 to
+200.00
–200.00 to
+200.00
–180.00 to
+180.00
–7.31 to
+109.59
239
Video Process