Displaying A List Of Effect Registers For Editing - Sony MVS-8000X SystemMVS-7000X System User Manual

5
Press [Delete].
Attaching a name to an effect register
1
In the Effect menu, press VF2 'Effect 1-99' and HF7
'Rename.'
The Rename menu appears.
2
Press the region display in the upper part of the list to
display a selection window, then select the region in
the selection window. Selecting multiple regions is
also possible.
To select all regions, press [ALL].
3
Press [OK].
The selected region name appears in the upper part of
the list.
4
Using any of the following methods, select the register
you want to name.
• Press directly on the list in status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Register
The selected register appears in reverse video.
5
Press [Rename].
A keyboard window appears.
6
Enter the name, of not more than eight characters, and
press [Enter].
The set name is reflected in the status area.
Notes
The following names cannot be used.
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1,
COM2, COM3, COM4, COM5, COM6, COM7,
COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
Displaying a List of Effect Registers
for Editing
You can display a list of effect registers including status
information (whether data is present and so on), then carry
out lock, copy, delete, and rename operations.
470
Register Operations in the Menus
Setting values
Register number 1 to 99
Displaying the list of effect registers with
status information
Press the menu title button at the top left of the Effect
menu.
The Effect >Status menu appears. The status area shows a
list of effect registers (1 to 99).
Register name displays
For the same number, the register name for the M/E-1
region takes precedence.
If there is no data for the M/E-1 region, then the register
name appears in the sequence M/E-2 >M/E-3 >M/E-4 >M/
E-5 >P/P >User1 to User8 >DME ch1 to DME ch8
>Device1 to Device12 >P-Bus >GPI >Macro.
Indication colors
Each register has a color-coded border, indicating its
status.
Selected register: pale blue border
Register containing data: shown amber within the
border. If, however, there are one or more locked
regions, the display is in red.
Write-protecting the contents of the
register (lock function)
(This applies to all regions.)
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the register
you want to lock.
• Press directly on the corresponding register
indication in the status area.
• Turn the knob.
Knob Parameter Adjustment
1 Register Register selection 1 to 99
2
Press [Lock].
The register is locked, and the background of the
register indication appears in red.
To release the lock
Press [Lock] once more, turning the contents of the frame
to amber.
Copying the contents of a register
(This applies to all regions.)
In the Effect >Status menu, use the following procedure.
1
Using any of the following methods, select the copy
source register.
• Press directly on the corresponding register
indication in the status area.
• Turn the knob.
Setting values