Table of Contents
Advertisement
In the case of a module without source name displays, this
button is invalid.
k AUX mix buttons
When AUX bus is selected using the AUX delegation
button, press this button to execute an AUX mix transition.
For details of AUX mix transition operation, see "AUX
Mix Transitions" (page 119).
Button
Description
AUX MIX
When the [2ND] button is off, press this
button, turning it on, to execute an AUX
mix transition. When the [2ND] button is
on, press this button, turning it on, to
execute an AUX mix transition on the 1st
row.
2ND AUX MIX
If the bus assigned in the 2nd row is
different from the bus assigned in the 1st
row, press this button, turning it on, to
execute an AUX mix transition on the 2nd
row.
Auxiliary Bus Control Block (for Router Control)
Press the [RTR] button, turning it on, to assign the
auxiliary bus control block to router control.
2 Selected source name
displays
1 Destination selection
buttons
9 Source name displays
1st
2nd
a Destination selection buttons
Press a button, turning it on, to select the destination to
which the router source is assigned.
The button pressed to assign a destination to a source
selection button in the 1st row lights amber. When another
58
Names and Functions of Parts of the Control Panel
5 Source selection
button rows
l RTR (router) button
Press this button, turning it on, to assign the auxiliary bus
control block to router control.
For details of the names and functions of parts for router
control, see the next section.
m
Level selection buttons
Used when the auxiliary bus control block is carrying out
router control.
3 DEST button
m Level selection buttons
k Aux mix buttons
0 SHIFT button
button is pressed to assign a different destination to a
source selection button in the 2nd row, it lights green.
b Selected source name displays
These show the source name selected for the destination.
l RTR button
8 2ND button
7 KEY button
4 Selected destination
display
6 XPT HOLD buttons
Advertisement
Table of Contents
