Table of Contents
Advertisement
1) When an external hard disk drive is connected
c VF buttons
These indicate the larger subdivisions of this menu.
Depending on the selected item, the menu screen contents
including the HF button indications change.
d HF buttons
These indicate the items within the menu.
Depending on the selected item, the menu indications
change.
Depending on the function, if any one is on, the status is
shown by an orange bar, as in the following figure.
e Status area
This shows the status of the settings items controlled by the
selected menu.
An orange frame appears around the parameter area
relating to the displayed menu. For each of the twelve
areas, pressing the display jumps to the related menu.
f Function button area
This shows the functions which can be operated in the
currently selected menu by means of buttons.
Each function button corresponds to a function which can
be set in the currently selected menu. Press it to enable the
function, to display a parameter group and adjust the
parameters with the knobs, or to execute the function.
These buttons are in groups by function. In the screen
example shown on the previous page, the [Key Bus] and
[Matte] function buttons constitute the <Key Fill> group.
g Parameter group button
This displays parameter group names for which the knobs
can make adjustments, the current parameter setting page
number, and the total number of the parameter setting
pages (Example: Color Vector 1/2).
When there are more than five parameters within the same
parameter group, press this button to display the sixth and
subsequent parameters, which can then be controlled by
the knobs.
h Knob parameter buttons
These show the parameters currently controlled by the
knobs and their values. Pressing one of these buttons
displays the numeric keypad window (see page 81), and
you can then enter a new value for the corresponding
parameter with the numeric keypad.
i Previous page button
This shows the page number of the previously displayed
menu screen. Press it to go back to that page. When the
indication [Parent] appears, this displays the parent
directory.
j Keyframe status
This shows the keyframe status of the reference region.
Pressing this button switches the menu screen as follows.
When a menu other than the Key Frame menu is
currently shown: The menu screen switches to the
Key Frame menu.
When the Key Frame menu is currently shown: The
screen immediately before the Key Frame menu.
In some parts of menus such as the File menu, this
functions as a "Region selection area," for selecting the
region to which operations apply.
k Default recall button
This only appears in those menus for which the default
recall function is available.
For details of the menus which can be initialized, see
"Menus Allowing a Return to Default Settings" (page 405)
in Appendix.
Press this button, turning it on, then press a VF button or
knob parameter button to return the settings to their default
values, in the following groupings.
• Function grouping: the functions within an HF menu
under the VF button
• Knob parameters (parameters currently controlled by the
knobs)
l b (previous) button and B (next) button
The b button returns to the previous menu. Press the B
button to continue to the next menu.
79
Basic Menu Operations
Advertisement
Table of Contents
