Table of Contents
Advertisement
1
In the Macro >Menu Macro Register >Recall & Run
menu, select the desired register on the menu macro
register list (see page 522).
2
Press [Menu Macro Edit].
The Menu Macro Edit menu (see previous figure)
appears. The menu macro register is recalled, and the
system is now in menu macro editing mode.
3
Select the event you want to edit.
• Press directly on the menu macro register
configuration list.
• Press the arrow keys on the right list to scroll the
reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1
No
Event number
4
If required, press [Auto Insert] to switch the auto insert
mode on or off.
5
Carry out the editing.
When auto insert mode is on: Edit using menu
operation to automatically insert after the selected
event.
When auto insert mode is off: Perform one of the
following.
• To overwrite the selected event, carry out the
new menu operation, then press [Modify].
• To insert an event before the selected event,
carry out the new menu operation, then press
[Insert Before].
• To insert an event after the selected event, carry
out the new menu operation, then press [Insert
After].
To delete the selected event
Press [Delete].
To delete all events, select [All Event Select] and press
[Delete].
6
With the same operation as step 7 of "Creating a new
menu macro" (page 524), change the event execution
interval.
7
With the same operation as steps 8 and 9 of "Creating
a new menu macro" (page 524) save the register.
Exiting the Menu Macro Edit menu without
saving the results of editing
In the Menu Macro Edit menu, press [Exit].
Scrolling event display using the menu
macro listing
1
Move the cursor to the event you want to display.
2
Turn the knob.
Knob Parameter Adjustment
2
About the menu macro editing mode
display
If while in menu macro editing mode you switch to another
menu, the display is as shown in the following figure.
Setting values
Screen when the keyframe status is displayed
1 to maximum
value
Menu shortcut button to Menu Macro Edit menu
H Scroll
Scroll the
characters in the
"Data" field.
The keyframe status section appears as follows.
• Menu macro register number
• Menu macro register name
• Current event number / total number of events
• Remaining memory
The Previous page button shows one of the following:
• When [Auto Insert] is on, "Menu Macro Auto Insert"
appears.
• When [Auto Insert] is off, "Menu Macro Insert After"
appears, but operates as [Insert After].
Setting values
1 to maximum
value
525
Menu Macros
Advertisement
Table of Contents
