Sepia Settings; Mono Settings; Posterization And Solarization Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

Knob Parameter Adjustment
4 Aspect
a) Specify minus values to stretch the image in the vertical direction,
and plus values to stretch the image in the horizontal direction.
16:9 mode
Knob Parameter Adjustment
1 Center X
2 Center Y
3 Size
4 Aspect
a) Specify minus values to stretch the image in the vertical direction,
and plus values to stretch the image in the horizontal direction.

Sepia Settings

Applying the Sepia effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Sepia], turning it on.
3
Set the following parameters.
Knob Parameter Adjustment
1 Mix Y
2 Mix C
3 Mix All
4
To set the color of the sepia image, press [Sepia
Color], turning it on, and adjust the parameters.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
306
Applying Special Effects (Effects on the Overall Video Signal)
Setting values
–100.00 to +100.00
Aspect ratio
a)
of shrunken
images
Setting values
–4.00 to +4.00 (SD)
X-value of
–16.00 to +16.00
shrinking
center point (HD)
–2.25 to +2.25(SD)
Y-value of
–9.00 to +9.00 (HD)
shrinking
center point
Shrinking 0.00 to 100.00
ratio
–100.00 to +100.00
Aspect ratio
a)
of shrunken
images
Setting values
0.00 to 100.00
Y signal mix
amount
Chroma 0.00 to 100.00
signal mix
amount
Y signal and Mix Y value shown
chroma
signal mix
amount
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
Hue 359.99 to 0.00
Masking the Sepia effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).

Mono Settings

Applying the Mono effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Mono], turning it on.
Masking the Mono effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers (see page 310).
Posterization and Solarization
Settings
You can specify the degree of luminance coarsening.
You can specify the degree of chroma coarsening.
Applying the Posterization or Solarization
effect
1
In the DME menu, select VF2 'Video Modify' and
HF3 'Color Modify.'
The Color Modify menu appears.
2
Press [Poster/Solar], turning it on.
3
Set the parameters.
Knob Parameter Adjustment
1 Poster Coarseness
of luminance
gradations
(Posterization
parameter)
2 Solar Coarseness
of chroma
gradations
(Solarization
parameter)
Setting values
0.00 to 100.00
0.00 to 100.00