Saving, Canceling, And Deleting Dme Wipe Snapshots - Sony MVS-8000X SystemMVS-7000X System User Manual

Parameter group [2/2]
Knob Parameter Adjustment
1 L Luminance
2 S Saturation
3 H Hue
Buttons for positioning the DME wipe
pattern
POS (position): Adjusts the position of the DME wipe
pattern.
CNTR (center): Returns the DME wipe pattern position
to the center.
When you press the [POS] button, the alphanumeric
display first shows the name of the parameter, "H" or "V,"
and then the value of the parameter.
When the [POS] button is lit green, you can adjust the
position of the pattern with the control knobs.
Knob Parameter Adjustment
1 H Horizontal
position
2 V Vertical
position
3 H (R)
Relative
horizontal
movement
4 V (R) Relative
vertical
movement
Buttons for setting DME wipe pattern
cropping
CROP: Adjusts the DME wipe pattern cropping.
4:3 CROP: Crops a 16:9 image to 4:3.
When the [CROP] button is lit green, you can set the
cropping ratio of the DME wipe pattern, with the control
knobs.
Parameter group [1/2]
Knob Parameter Adjustment
1 H Cropping ratio
of the image
from left and
right sides
2 V Cropping ratio
of the image
from top and
bottom sides
3 A Cropping ratio
of the image
from all four
sides
Setting values Knob
0 to 100 1
0 to 100
0 to 359
2
3
4
Button for specifying effect size
SIZE: Specifies the effect size. When the [SIZE] button is
lit green, you can specify the effect size, with the
control knobs.
Setting values
–200 to +200
Knob
1
–200 to +200
a) The effect size when [Size] is off is taken as 100.00.
–400 to +400
DME wipe modify clear
–400 to +400 With the [DME WIPE] button held down, pressing and
holding down the region selection button for the selected
region returns the DME wipe settings to their initial status.
For details of the initial status, see "Saving User-Defined
Settings" in Chapter 18 (Volume 2).
Saving, Canceling, and Deleting
DME Wipe Snapshots
The operations of saving, canceling, and deleting a DME
wipe pattern snapshot you have created are the same as the
Setting values operations of saving, canceling, and deleting a wipe
snapshot (see page 182).
–100 to +100
–100 to +100
–100 to +100
DME Wipe Pattern Operations in the Multifunction Flexi Pad Control Block
Parameter group [2/2]
Parameter Adjustment
T Cropping ratio
of the image
from the top
L Cropping ratio
of the image
from the left
R Cropping ratio
of the image
from the right
B Cropping ratio
of the image
from the
bottom
Parameter Adjustment
S Effect sizes
Setting values
–100 to +100
–100 to +100
–100 to +100
–100 to +100
Setting values
a)
0 to 200
201