Table of Contents
Advertisement
Name
Description
• When pressed simultaneously with the
REC
[PLAY] button, this button lights red (the
[PLAY] button lights amber), and the image
from the selected device is recorded.
• This button cannot be used for frame
memory clip operations.
f External device operation buttons
Pressing the following buttons selects the search dial
mode.
Name
Description
ENBL
When this is pressed, turning it on, the search
(enable)
dial [VAR], [JOG], and [SHTL] button
operations are enabled.
VAR
Sets the search dial to variable mode.
(variable)
Keyframe Control Block
In the keyframe control block, you can carry out effect
editing and execution.
0 EFF LOOP button
8 Effect execution
direction selection
buttons
7 Effect execution
section
a EDIT ENBL (edit enable) button
Press this button, turning it on, to enable effect editing
operations with the keyframe control block.
When macro editing is carried out, this button lights red.
9 STOP NEXT KF button
Name
Description
JOG
Sets the search dial to jog mode.
SHTL
Sets the search dial to shuttle mode.
(shuttle)
g TIMELINE button
Press to switch the device selected with the device
selection buttons to timeline setting mode.
h STOP button
When pressed, this lights amber, and operation of the
device selected with the device selection buttons stops.
i Search dial
Use this for search and other operations on the material of
an external device.
For details, see "Controlling Tape/Disk Transport" in
Chapter 12 (Volume 2).
1 EDIT ENBL button
4 Duration setting buttons
b Edit point specification buttons
The following buttons are used to set an edit point.
Names and Functions of Parts of the Control Panel
qa AUTO INS button
5 KF LOOP button
6 PAUSE button
2 Edit point
specification buttons
3 Editing buttons
51
Advertisement
Table of Contents
