Trail Settings - Sony MVS-8000X SystemMVS-7000X System User Manual

Mat: An effect like light striking paper, cloth, or
another diffusively reflective surface.
2
Set the following parameters.
Knob Parameter Adjustment
1 Intensity Intensity of
diffuse light
area
2 Offset Offset of
center of
diffuse light
area
3 Width Width of
diffuse light
area
4 Soft Softness of
diffuse light
area
a) For SD 4:3 and SD 16:9
b) For HD 4:3
c) For HD 16:9
3
When you select Normal or Mat in step 1, press [Bar
Diffuse Color], turning it on, and adjust the following
parameters to set the color of the diffuse light area.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
With no selection With a selection made in
made in the <Bar the <Bar Light Mode>
Light Mode> group group
Width
Bar Light Diffuse Light
Diffuse Light
Bar Light
Offset = 0

Trail Settings

Notes
Turning Trail on when Motion Decay, Keyframe Strobe,
Setting values
or Wind is on turns it off automatically.
0.00 to 100.00
Applying the Trail effect
a)
–4.00 to +4.00
1
b)
–12.00 to +12.00
c)
–16.00 to +16.00
0.00 to 100.00
2
0.00 to 100.00
3
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
4
Switching the priority between the current
image and trail superimposed
In the <Priority> group, select the method of
superimposition.
Over: Current image is on top.
Under: Trail is on top.
Selecting the source to create a trail
In the <Trail Source> group, select the source to create a
trail.
Notes
• "Rainbow," "Mix Color," and "Ext Video" are not
supported on the MVE-8000A.
• "Mix Color" or "Ext Video" can only be applied to one
of the background (see page 344), flex shadow (see page
296), trail, and wind (see page 335) effects.
If you select "Mix Color" or "Ext Video" in one of these
In the DME menu, select VF5 'Light/Trail' and HF2
'Trail.'
The Trail menu appears.
Press [Trail], turning it on.
Set the parameters.
Knob Parameter Adjustment
1 Decay Degree to
which the
trail is left
2 Interval
Freeze
interval
3 Live Proportion of
the interval
between two
successive
freeze
images for
which the
video is run
a) 0.00 is no trail. At 100.00, the trail does not disappear.
To erase the trail, press [Trail Eraser], turning it on.
Applying Special Effects (Lighting and Recursive Effects)
Setting values
a)
0.00 to 100.00
1 to 255 (frames)
0.00 to 100.00
331