Table of Contents
Advertisement
2
Press the region display in the upper part of the list to
display a selection window, then select the region in
the selection window. Selecting multiple regions is
also possible.
To select all regions, press [ALL].
Operation between regions
Operation between regions is possible in the following
cases.
• Two of the M/E-1, M/E-2, M/E-3, M/E-4, M/E-5,
and P/P regions
• Two of the User1 to 8 regions of the same
configuration
• Two of the DME ch1 to 8 (including Global) regions
3
Press [OK].
The selected region name appears in the upper part of
the list.
4
Using any of the following methods, select the desired
registers.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter Adjustment
1
From Reg
Copy source
register number
2
To Reg
Copy destination
register number
3
Num
Select number of
registers
• To select all registers, press [ALL].
5
To copy without transferring the name, in the <Copy>
group, press [W/o Name], turning it on.
6
In the <Copy> group, press [Copy].
This carries out the copy.
Merging effect registers
1
In the Effect menu, select VF2 'Effect 1-99' and HF3
'Copy/Merge.'
The Copy/Merge menu appears.
The left side of the status area shows a list for the
register coming afterward when merged. The right
side shows a list for the register coming before when
merged.
2
Press the region display in the upper part of the list,
and in the selection window select the region.
Selecting multiple regions is also possible.
To select all regions, press [ALL].
3
Press [OK].
The selected region name appears in the upper part of
the list.
4
Using any of the following methods, select the
register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter Adjustment
1
2
5
Press [Merge].
Deleting data from effect registers
Setting values
1
1 to 99
In the Effect menu, press VF2 'Effect 1-99' and HF6
'Delete.'
1 to 99
The Delete menu appears.
1 to 99
2
Press the region display in the upper part of the list to
display a selection window, then select the region in
the selection window. Selecting multiple regions is
also possible.
To select all regions, press [ALL].
3
Press [OK].
The selected region name appears in the upper part of
the list.
4
Using any of the following methods, select the desired
registers.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter Adjustment
1
3
• To select all registers, press [ALL].
From Reg
The register
coming
afterwards when
merged
To Reg
The register
coming before
when merged
Register
Register number
Num
Select number of
registers
Register Operations in the Menus
Setting values
1 to 99
1 to 99
Setting values
1 to 99
1 to 99
469
Advertisement
Table of Contents
