Creating And Editing Keyframes; Creation; Insertion; Modification - Sony MVS-8000X SystemMVS-7000X System User Manual

Creating and Editing
Keyframes
For this operation you can use the numeric keypad control
block and keyframe control block, or the Multifunction
Flexi Pad control block. In the following, the case of using
the numeric keypad control block and keyframe control
block is described as an example.
For details of Multifunction Flexi Pad control block, see
"Keyframe Creation and Editing in the Multifunction
Flexi Pad Control Block" (page 457).

Creation

Creating new keyframes
To create new keyframes, after recalling an empty register,
use the following procedure to create and insert each new
keyframe. Use the keyframe control block for carrying out
the operation.
1
Press the [EDIT ENBL] button, turning it on.
This enables effect editing in the keyframe control
block.
2
Create the image you want to be the first keyframe.
3
Press the [INS] button.
This takes the current image as the first keyframe.
You can make a setting in the Setup menu so that when
you recall an empty register, the system state at that
point is automatically captured as the first keyframe.
4
Create the image you want to be the next keyframe.
5
Press the [INS] button.
This inserts the current image as the second keyframe
after the first keyframe.
Repeat steps 4 and 5 to create the required number of
keyframes.
To insert a new keyframe before an existing
keyframe
Hold down the [SHIFT] button and press the [INS] button,
to insert a new keyframe before the current keyframe.
450

Creating and Editing Keyframes

Insertion

Inserting keyframes
To insert a keyframe in an existing effect, use the
following procedure in the keyframe control block.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect at the desired edit point.
3
Create the image for the keyframe you want to insert.
4
Press the [INS] button.
When the edit point is on a keyframe, to insert the new
keyframe before the existing keyframe, hold down the
[SHIFT] button and press the [INS] button.
This inserts the current image as the new keyframe.
Inserting a keyframe may change the total duration of
the effect.
For details, see "Time Settings" (page 437).

Modification

Modifying keyframes
Use the following procedure in the keyframe control
block.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect at the desired edit point.
When the edit point is on a keyframe, this is what you
modify. If the edit point is between two keyframes, the
previous keyframe is what you modify.
Notes
In constant duration mode (see page 436) modification
is only possible when the edit point is on a keyframe.
3
Using image transformations or adding special effects,
modify the keyframe.
4
Press the [MOD] button.
Modifying more than one keyframe
simultaneously
You can modify a number of keyframes simultaneously.
There are three different cases for this operation.
• Modifying from the edit point to a particular keyframe
• Modifying all keyframes in the effect
• Modifying the keyframes in a specified range