Sony MVS-8000X SystemMVS-7000X System User Manual page 169

Knob Parameter Adjustment
2 Soft Edge softness
5
If you selected Pattern in step 4, if required, the
following modifiers can be added. After selecting a
wipe mix, skip to step 6.
When turning [Position] on and setting the pattern
position
Knob Parameter Adjustment
1 Position H Horizontal
position
Vertical position –200.00 to
2 Position V
a) See page 169.
When turning [Multi] on and using replications of
the same pattern
Knob Parameter Adjustment
1 H Multi Number of
repetitions of
pattern
horizontally
2 V Multi Number of
repetitions of
pattern
vertically
3 Invert Type Replication
layout
a) See page 171.
When turning [Aspect] on and setting the aspect
ratio of the pattern
Knob Parameter Adjustment
1 Aspect Aspect ratio
a) See page 171.
When turning [Angle] on in the <Rotation> group
and slanting the pattern
Knob Parameter Adjustment
1 Angle Angle of pattern
rotation
a) See page 170.
When turning [Speed] on in the <Rotation> group
and rotating the pattern at a constant rate
Knob Parameter Adjustment
1 Speed Rotation rate of
pattern
a) See page 170.
6
To adjust color 1, set [Color 1] on, and to adjust color
Setting values
2 set [Color 2] on, then adjust the parameters.
0.00 to 100.00
Knob
1
2
3
7
To interchange color 1 and color 2, press [Color
Invert], turning it on.
Setting values
–200.00 to
a)
Setting the wipe position (Positioner)
+200.00
When you turn on this function, you can move the wipe
a)
+200.00
pattern to any position.
Setting values
1 to 63
• The parameter H Position controls the horizontal
1 to 63
position of the pattern.
A negative value moves the pattern to the left, and a
positive value moves the pattern to the right.
• The parameter V Position controls the vertical position
a)
1 to 4
of the pattern.
A negative value moves the pattern down, and a positive
value moves the pattern up.
You can set the position independently for the main pattern
and sub pattern.
1
In the M/E-1 >Wipe menu, select HF5 'Main Modify.'
Setting values
–100.00 to
The Main Modify menu appears.
a)
+100.00
2
In the <Position> group, press [Position], turning it on,
and set the pattern position.
Knob Parameter Adjustment
Setting values
1
–100.00 to
a)
+100.00
2
To return the pattern position to the center of the
screen
In the <Position> group, press [Center].
Setting values
To move the pattern from its current position to
–100.00 to
the center through the course of a transition
a)
+100.00
In the <Position> group, press [Auto Center], turning it on.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Positioner Off
Position H Horizontal
position
Vertical position –200.00 to
Position V
Basic Procedure for Wipe Settings
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Positioner On
Setting values
–200.00 to
+200.00
+200.00
169