Table of Contents
Advertisement
Icon
Message
Prepare failed, all one Clip recall failed
(–17).
ERROR (–19). Bad register number.
Prepare failed, because there is clip
playing (–22).
Change Password
The password has been successfully
changed.
Failed.
The password was not changed.
Create Key Frame
[Create Key Frame] cannot be
executed.
FMx is not assigned to a user region.
[Create Key Frame] cannot be
executed.
Key Frame Register is locked. (UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is busy. (UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is being edited.
(UserX)
[Create Key Frame] cannot be
executed.
There is no free Key Frame. (UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is not active.
(UserX)
Deactivate License
The license will be deactivated after
rebooting your system.
Disk Format
Success!!
Failure.
Make sure of the memory card.
Error
This operation is cancelled, because
the register is locked.
Please change the register status to
be unlocked first.
688
Error Messages
Description
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, All One Clip recall failed (internal
processing error).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, the Register Number was an invalid
value (internal processing error).
2564: Frame Memory >External Device >Backup to DDR/VTR
When [Backup Start] was pressed, processing failed because clip playback
was in progress.
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
The password was successfully changed.
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
The password could not be changed.
2515: Frame Memory >Still >Create Key Frame
When [Create Key Frame] was pressed, the frame memory output (FMx)
was not assigned to a User region.
Assign the output in menu 7331.4 (Engineering Setup >Switcher >Config
>User1–8 Config), and try again.
2515: Frame Memory >Still >Create Key Frame
When [Create Key Frame] was pressed, the register (UserX region) was
locked. Unlock the register.
2515: Frame Memory >Still >Create Key Frame
When [Create Key Frame] was pressed, files were being loaded into the
register (UserX region). Try again after file loading has finished.
2515: Frame Memory >Still >Create Key Frame
When [Create Key Frame] was pressed, keyframe creation or editing was in
progress using register (UserX region). Try again after the keyframe
operation has finished.
2515: Frame Memory >Still >Create Key Frame
When [Create Key Frame] was pressed, an insufficient number of usable
keyframes were in UserX region.
2515: Frame Memory >Still >Create Key Frame
When [Create Key Frame] was pressed, the region selection button for the
register in the numeric keypad control block was not selected. Select the
region selection button [UserX] in the numeric keypad control block, and try
again.
7316.7: Engineering Setup >System >Install/Unit Config >License >License
Management
The Deactivate License procedure was completed successfully.
7317: Engineering Setup >System >Maintenance
Formatting of the removable disk was completed successfully.
7317: Engineering Setup >System >Maintenance
Formatting of the removable disk failed. Check that the memory card is
correctly inserted.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store/Recall >Edit
An attempt was made to assign a locked register. Unlock the register before
carrying out the assignment.
Advertisement
Table of Contents
