Chapter 6
X330WAN CLI Commands
show module-identity
Use the
show module-identity
for acquiring a license.
Syntax
show module-identity
Example
show module-identity
X330WAN-2DS1-1(super)# show module-identity
Mod
Module Identity
---
---------------
1
show running-config
Use the show running-config command to show the RAM based
configuration currently running on the device.
Syntax
show running-config
show snmp
Use the
Syntax
show snmp
Example
X330WAN-2DS1-1(super)# show snmp
Authentication trap enabled
Community-Access
----------------
read-only
read-write
trap
Trap-Rec-Address
----------------
106
1234567
command to display SNMP information.
show snmp
Community-String
----------------
public
public
public
Traps Enabled
----------------
command to display the device identity required
Avaya X330WAN User's Guide