Horn Removal (Te - Smr); Electric Cooling Fan Removal (Te - Txc - Smr) - Husqvarna TC449 Workshop Manual

2
1
H02470
3
2
GENERAL PROCEDURES

Horn removal (TE - SMR)

- Loosen the two screws (1) (using a 8 mm wrench)
- Disconnect connector (2) and remove horn (3).
3
1

Electric cooling fan removal (TE - TXC - SMR)

- Remove saddle first, and then the left side panel.
- Disconnect the connector (1).
H02471
- Loosen the four screws (2) (with a 7 mm wrench), and remove electric fan
(3).
2
H02472
E.28
1 edition (08-2010) _Rev. 11-2010
st