Adjustment Of The Control Lever And Check Of Front Brake Fluid Level - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 104
Cap7_GB
9-07-2007
16:27
Pagina 41
ADJUSTMENT OF THE CONTROL LEVER AND
CHECK OF THE FRONT BRAKE FLUID LEVEL
On the SMR model the lever position can be adjusted (4
adjustments) for any driver hand size. To decrease the lever
distance from the handle grip, turn the adjuster (B)
CLOCKWISE. To increase the lever distance from the handle
grip, turn the adjuster (B) COUNTERCLOCKWISE.
On the TE, TXC and TC models the adjuster (2), located on the
control lever, allows adjusting of the free play (a).
Free play (a) must be at least 3 mm (0.1 in.).
The level of the fluid in pump reservoir must never be below
the minimum value (1), which can be checked from the window
TE-TC-TXC
on the rear side of the pump body (TE, TC). For SMR model,
check the level on the fluid reservoir.
A decrease of the fuel level will let air into the sustem, hence
an extension of the level stroke.
WARNING*: If the brake lever feels mushy
when it is applied, there may be air in the
brake lines or the brake may be defective.
Since it is dangerous to operate the motor-
cycle under such conditions, have the brake
checked immediately by an authorized
HUSQVARNA dealer.
SMR
SMR
CAUTION*: Do not spill brake fluid on to
any painted surface or lenses.
CAUTION*:Do not mix two brands of fluid.
Change the brake fluid in the brake line if
you wish to switch to another fluid brand.
CAUTION*: Brake fluid may cause irritation.
Avoid contact with skin or eyes. In case of
contact, flush thoroughly with water and
call a doctor if your eyes were exposed.
A: to encrease clearance
B: to decrease clearance
TE-TC-TXC
+
A
-
B
TE-TC-TXC
2
41

Advertisement

Table of Contents
loading

Table of Contents