Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - Husqvarna TE 125 EU 2015 Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4

Kill switch (TE EU/AU)

(All TE 125)
The clutch lever
The clutch is activated hydraulically and adjusts itself automatically.
L01701-11
(All TE 250/300)
The clutch lever
The clutch is activated hydraulically and adjusts itself automatically.
M00351-10
The hand brake lever
The hand brake lever is used to activate the front brake.
L02604-10
The throttle grip
L02604-11
The kill switch
Possible states
• Kill switch
engine can be started.
• Kill switch
engine stops, and a non-running engine will not start.
M00352-10

is fitted on the left side of the handlebar.
 is fitted on the left side of the handlebar.
 is located on the right side of the handlebar.
 is fitted on the right side of the handlebar.
 is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed, and the
pressed – In this position, the ignition circuit is interrupted, a running
14