Setting Communication Using The Foma Pc Setup Software; Setting Communication Using The Foma Pc Setup Software (When Using Windows Vista) - Sony Ericsson FOMA SO905iCS Manual

2
Select [FOMA HIGH-SPEED対応端末 （受信最大
3.6Mbps） ] or [FOMA端末 （受信最大384kbps） ] and
click [最適化を行う].
When the system settings are optimized
The message "現在、 FOMA HIGH-SPEED対応端末用に
最適化されています。 " (The settings are optimized for
the FOMA HIGH-SPEED-compatible terminal.) appears.
To cancel the settings because of some reasons such as
connecting using other than the FOMA terminal, click [最
適化を解除する].
3
Restart the PC in accordance with the instructions
on the window.
The system settings are optimized.
Host (APN) Setting
You can set a host (APN) for packet communication.
Connect the FOMA terminal to a PC before starting this
operation.
1
Start the FOMA PC setup software and click [接続
先(APN)設定].
2
Click [OK].
The host (APN) is loaded from the FOMA terminal. Wait for
a few moments.
3
Set a host (APN).
To add a host (APN)
Click [追加].
To edit (change) a host (APN)
Select a host (APN) and click [編集].
To delete a host (APN)
Select a host (APN) and click [削除].
 You cannot delete a host (APN) saved as [cid1] and
[cid3]. (Even if you select [cid3] and click [削除], it
is not actually deleted. The operation is returned to
[mopera.net].)
To save data in a file
Click the [ファイル] menu → [上書き保存]/[名前を付け
て保存].
To read data from a file
Click the [ファイル] menu → [開く] and select a saved
file.
To read host (APN) data from the FOMA terminal
Click the [ファイル] menu → [FOMA端末から設定を
取得].
To write host (APN) data to the FOMA terminal
Click the [ファイル] menu → [FOMA端末へ設定を書き
込む].
To create dial-up
Select a host (APN) and click [ダイヤルアップ作成]. Set
up a dial-up connection for packet communication in
accordance with the instructions on the window.
●
The host (APN) is information that must be saved in the
FOMA terminal. When you use the PC with a different
FOMA terminal connected, it is required to save it again in
the new FOMA terminal.
● To continue using a host (APN) saved in the PC, save the
registration number (cid) of the same host (APN) in the
FOMA terminal.
Setting Communication Using the FOMA PC
Setup Software (When Using Windows Vista)
Installing the FOMA PC Setup
Software
To use the FOMA PC setup software, install it from this
CD-ROM.
 When you install the FOMA PC setup software, be sure to
use the user account with Administrator privilege of the PC.
An error occurs when a user account without Administrator
privilege is used. For more information on Administrator
privilege, contact the manufacturer of your PC or a
representative of Microsoft Corporation.
 Confirm that the FOMA communication configuration files are
installed properly on the PC (P.5).
1
Set "FOMA SO905iCS CD-ROM" in the CD-ROM
drive of the PC.
2
Click [データリンクソフト ・ 各種設定ソフト] → [イ
ンストール] under "FOMA PC設定ソフト" (FOMA
PC setup software).
 When you click [インストール], a warning window
as shown below may appear. This warning appears
because of the security setting on the Internet Explorer,
however, causing no problem for use.
W h e n t h e " ファイルのダウンロード − セキュリティ
の警告" (File Download - Security Warning) window
appears
Click [実行].
The user account control window appears.
13