Table of Contents
Advertisement
Notes on the service for the videophone
●
When the Voice Mail Service takes a videophone
message for you, it is notified to you by SMS.
●
To change the settings of the Voice Mail Service
for videophone support, press
in the stand-by display and operate as
instructed by the guidance.
●
A videophone of AV32K type is disabled for
connection to the Voice Mail Service Center.
●
When you connect to the Voice Mail Service
Center using Chara-den, the DTMF operation
is not available. From the function menu, select
[DTMF send mode] (P.75).
Using the Call Waiting
Service
When there is another incoming call while you
are on a call, the in-call ring tone notifies you
of the second call. You can answer the second
call by putting the first call on hold. You can
also put your current call on hold and place a
call to another party.
When you receive a videophone call during a
voice call, you can answer the videophone call
by disconnecting the voice call. You cannot
answer a voice/videophone call that arrives during
a videophone call. However, it is saved in the
Received record.
To use the Call Waiting Service, set the Arrival Call
Act (P.396) to [Answer]. If it is set to other operation,
you cannot answer a second voice call received
while you are on a voice call even if the Call Waiting
Service is activated.
1
From the Menu, select [Settings] →
[Management] → [NW Services] → [Call
Waiting] and press
2
Set each item.
Menu item
Activate
Select [Activate] → [Yes].
Deactivate
Select [Deactivate] → [Yes].
Check setting
Select [Check setting].
.
Operation
●
To put the current call on hold and answer an
incoming call, press
put a call on hold, the message "Connecting"
appears. Every time you press
can switch between the calls. To disconnect the
put on hold call, from the Function menu, select
[Release Hold Call].
●
To disconnect the current call and answer an
incoming call, press
Using the Call Forwarding
Service
The Call Forwarding Service forwards a voice
or videophone call to a preset forwarding
number when you are in a location without the
radio wave, the FOMA terminal is powered off,
or you do not answer the call within the preset
ring time.
When the Call Forwarding Service and Record
Message (P.72) are set simultaneously, and if you
want to give priority to the Call Forwarding Service,
set the ring time for the Call Forwarding Service
shorter than the time before starting the answering
message for the Record Message.
When the Call Forwarding Service is set to "Activate"
and if you do not answer an incoming voice or
videophone call, the call is saved in the Received
record as a "Missed call" and the notification icon
" " (Missed call) appears in the stand-by display.
When you receive a videophone call, the call is
disconnected if the forwarding number does not
support a videophone feature compliant with
3G-324M.
■ Basic flow of the Call Forwarding Service
Step 1
Save the forwarding number.
Step 2
Activate the Call Forwarding Service.
Step 3
Receive a call on your FOMA terminal.
Step 4
I f y o u d o n o t a n s w e r t h e c a l l , i t i s
automatically forwarded to the specified
forwarding number.
1
From the Menu, select [Settings] →
[Management] → [NW Services] → [Call
Forwarding] and press
(Call). When you
(Switch), you
and
.
.
Continued
393
Advertisement
Chapters
Table of Contents
