Sony Ericsson FOMA SO905iCS Manual page 33

/ The i-mode center is full of Message R,
Message F at the i-mode center/The
i-mode center is full of Message R, the
FOMA terminal is full of Message F

While providing location information
by GPS/While accepting to provide
location information during the period
of accepting the location request
While rejecting to provide location information
during the period of accepting the location request
During GPS positioning
(Blue)/ (Red)
While connecting to the 3G network (Packet
communication: able)/While connecting to the
3G network (Packet communication: disable)
/ While connecting to the GSM network/
While connecting to the GPRS network

/ While running i-αppli (i-αppli stand-by
display)/While running i-αppli DX
/ i-αppli stand-by display is set/i-αppli
DX stand-by display is set (P.247)

The USB mode setting is set to
Communication mode (P.315)
The USB mode setting is set to
microSD mode (P.315)
/ / /
The USB mode setting is set to MTP
m o d e : C o n n e c t i n g / Tr a n s f e r r i n g /
Transfer completed/Error (P.315)
While using a hands-free device (P.65)

Secret display is [ON] (P.141)

While the microSD memory card is inserted (P.307)
(Flashes during preparation for access after
insertion of the microSD memory card)
While the microSD memory card management
information is being updated (P.314)

During a voice call
During a videophone call (P.50)
During PushTalk communication (P.80)
While using PushTalkPlus (P.89)
During 64K data communication

/ /
1/2/3 or more tasks are being executed
(P.353) ( changes to
is in progress on the MUSIC Player)
While data in the MUSIC Player is being updated

/ / / Battery level (P.42)

Current time (Displayed in 24-hour
format in other than the stand-by display)
 When the Clock is set to [Pict clock], the clock
is displayed in the stand-by display (P.118).

The vibrator is set for incoming calls (P.110)
The vibrator is set for incoming mail (P.110)
The vibrator is set for incoming calls
and mail (P.110)
● The FOMA terminal's display is manufactured based on the leading edge technologies, and
some pixels unlit or lit may appear constantly in the display. This is not a malfunction.









while playback

Incoming call ring volume is OFF (P.109)
Incoming mail ring volume is OFF (P.109)
Incoming call and mail ring volumes
are OFF (P.109)
Manner mode is set (
Silent mode is set (P.115)
Original manner mode is set (
blue) (P.115)
Public mode (Drive mode) is set (P.69)
Personal data lock is set (P.138)
Key dial lock is set (P.139)
Personal data lock and Key dial lock
are set (P.138, 139)
IC card lock is set (P.262)
D u r i n g M u s i c & V i d e o C h a n n e l
reservation (P.339)
Alarm is set (P.362)
Schedule alarm is set (P.364)
Alarm and Schedule alarm are set (P.362, 364)
/
Record message is set ( is white) (P.72)
There are non-played back record
messages ( is light blue)
There is no non-played back record
message ( is blue)
/
Record message is OFF
(There are record messages) ( is gray)
There are non-played back record
messages ( is light blue)
There is no non-played back record
message ( is blue)
The number of recorded messages is
displayed at . When the number of recorded
messages becomes full, " " appears.
/
Videophone message is set (
There are non-played back videophone
messages ( is light blue)
T h e r e i s n o n o n - p l a y e d b a c k
videophone message (
/
Videophone message is OFF
(There are videophone messages) (
There are non-played back videophone
messages ( is light blue)
T h e r e i s n o n o n - p l a y e d b a c k
videophone message (
The number of recorded videophone
messages is displayed at
the number of recorded videophone
messages becomes full, " " appears.
Lock key is set (P.140)
is pink) (P.115)
is
is green) (P.72)
is blue)
is gray)
is blue)
. When
31
Continued