Using The Foma Terminal With A Pc; Usb Mode Setting - Sony Ericsson FOMA SO905iCS Manual

2
Select [microSD info] and press
ｍｉｃｒｏＳＤ ｉｎｆｏ
Ｆｕｌｌ ｃａｐ．
６０．５ＭＢ
Ｕｓｉｎｇ
２２．１ＭＢ
Ｍｙ ｐｉｃｔｕｒｅ
３．２ＭＢ
ＭＵＳＩＣ
１２．１ＭＢ
ｉ−ｍｏｔｉｏｎ
５．６ＭＢ
Ｍｅｌｏｄｙ
０．５ＭＢ
To change the unit
Press (Unit chg) to switch temporarily
between the MB and KB displays.
Updating the Management Information
of the microSD memory card
If you edit, add, or delete data stored in
the microSD memor y card on a device
other than the FOMA terminal, it may not be
displayed correctly on the FOMA terminal. If
this happens, update the information of the
management file in the microSD memory card.
1
Press (Func) in the microSD category
list.
The Function menu appears.
2
Select [Update mng. info] and press
The Update mng. info display appears.
3
Select a category to be updated, press
, and press
The screen for confirming whether to update the
management information appears.
4
Select [Yes] and press
The management information is updated. While the
management information is updated, " " appears.
● If any data in the microSD memory card has a
file name that is not supported by the FOMA
terminal, the file name is changed when you
update the management information.
●
If you update the management information while
the screen for confirming whether to save the
recorded images is displayed, the image that is
being confirmed is discarded when the microSD
memory card is set as the place to save to.
314
.
(Complete).
.
Using the FOMA Terminal
with a PC
When you connect the FOMA terminal to a
PC using the FOMA USB Cable with Charge
Function 01/02 (optional), you can use it as
an external drive to read/write data on the
microSD memory card.
 You can change the USB mode setting before
connecting the FOMA terminal to a PC.
 If the FOMA terminal is not connected to a PC
correctly or the battery level is very low or 0, not only
data cannot be sent/received, but also it may be lost
in some cases.
 Do not unplug the FOMA USB Cable with Charge
Function 01/02 (optional) during reading/writing
data. If you do so, not only data cannot be sent/
received, but also it may be lost in some cases.
 The operating environment for using the FOMA
terminal connected to a PC is as follows.
Item
Connection F O M A U S B C a b l e w i t h C h a r g e
cable
Function 01/02 (optional)
PC main unit PC with a USB port (Universal Serial
Bus Specification 1.1 compliant) that
can be used to connect the FOMA
USB Cable with Charge Function
01/02 (optional)
OS Windows 2000 Professional (SP3 or
later)※,
.
Windows XP,
Windows Vista (Japanese version)
※ [Communication mode] and [microSD mode] are
supported.
1
From the Menu, select [Settings] →
[Management] → [USB mode setting] and
press .
ＵＳＢ ｍｏｄｅ ｓｅｔｔｉｎｇ
Ｃｏｍｍｕｎｉｃａｔｉｏｎ ｍｏｄｅ
ｍｉｃｒｏＳＤ ｍｏｄｅ
ＭＴＰ ｍｏｄｅ
Ｕｓｅｓ ＵＳＢ Ｈａｎｄｓ−ｆｒｅｅ／
ｄａｔａ ｔｒａｎｓｍｉｓｓｉｏｎ／
ｄａｔａ ｔｒａｎｓｆｅｒ
[Communication mode]:
Perform packet and 64K data communication,
and send/receive data (OBEX™ communication).
<USB mode setting>
Required environment