Sony Ericsson FOMA SO905iCS Manual page 364

[OFF]:
Do not set the vibrator.
To check the vibration
Move the cursor to the pattern and press
(Confirm).
11
Select an indicator color at [Color].
Select from 12 indicator colors or [C13:ALL]
(indicator flashes in 12 colors in sequence).
When you move the cursor, the indicator flashes
accordingly.
12
Select [ON]/[OFF] at [Snooze].
[ON]:
The alarm operates for about one minute and
repeats operation up to six times every five
minutes.
[OFF]:
Do not repeat the alarm operation.
13
Press (Complete).
The Alarm is set and " " appears in the stand-by
display.
● When the Alarm and Schedule alarm are set
simultaneously, " " is displayed instead of " ".
● When the Alarm and Schedule alarm are set to
start at the same time, the Schedule alarm has
priority.
● When you set an i-motion or Chaku-Uta Full
the alarm tone or set an i-motion for the alarm
image, the settings may be changed in some
cases.
At the Alarm Time
The alarm tone sounds for about one minute
with the indicator flashing.
Ａｌａｒｍ
０６：３０
362
®
for
To stop the alarm tone
Press any key.
When you do not stop the
alarm tone
The display infor ming
the release of the alarm
appears. To turn off the
display, press or
To stop the Snooze
Press .
● If you set an i-motion with video and sound
tracks to the alarm tone, a movie in the i-motion
is displayed.
● If the alarm time comes during a voice call or
PushTalk communication, the default alarm tone
sounds and the default alarm image is displayed.
The vibrator does not operate.
●
The Alarm does not operate in the following
cases.
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software
● If the alarm time comes in the following cases,
the Alarm may operate when the status changes
to during a call or stand-by.
- While placing/receiving a voice/videophone
call or originating/receiving a PushTalk call
- During packet communication
- During the infrared communication/while the
infrared remote control is being used
- During the iC communication
- During data communication or while reading/
writing data from/into a microSD memory card
on a PC with the FOMA terminal connected
using the USB cable
- While recording a still image/movie
- While the Schedule alarm is sounding
- B e e p w h i l e re c e i v i n g A re a M a i l , w h i l e
sounding Area Mail ring tone, or displaying
Area Mail
● If another function is executed during the Alarm
or Snooze operation, the alarm is stopped. The
Snooze keeps operating within five times.
● When the PIN1 code setting and the Auto power
on for the Alarm are set to [ON], the FOMA
terminal is automatically powered on at the alarm
time and the PIN1 code input screen appears
after the Alarm operation. If you set any data for
which the UIM operation restriction function is set
to the alarm tone, the default melody sounds.
● If you leave the FOMA terminal with the battery
pack removed or fully expended for a long
period of time, the date and time is reset, and the
Alarm may not operate correctly.
● If you remove the battery pack and turn off the
FOMA terminal, the FOMA terminal is not turned
.
on automatically even if the Auto power on is set
to [ON].