Table of Contents
Advertisement
Example: Displaying a map of your current location
1
From the Menu, select [LifeKit] → [GPS]
→ [Position location] and press
You can also check your current location by
pressing
for over a second in the stand-by
display. After positioning, the operations follow
the settings of the GPS button setting (P.278).
Ｐｏｓｉｔｉｏｎｉｎｇ ｌｏｃ．
Ａｃｃｕｒａｃｙ： ★ ☆ ☆
Ｐｏｓｉｔｉｏｎ ｌｏｃａｔｉｏｎ
Ｐｏｓｉｔｉｏｎｉｎｇ
ｃｏｍｐｌｅｔｅｄ．
Ａｃｃｕｒａｃｙ ★ ★ ★
Ｒｅａｄ ａ Ｍａｐ
Ｒｕｎ ｉ ａｐｐｌｉ
Ｐａｓｔｅ ｔｏ ｍａｉｌ
Ａｄｄ ｔｏ ｐｈｏｎｅｂｏｏｋ
Ａｔｔａｃｈ ｔｏ ｉｍａｇｅ
Use the positioning accuracy as a guide. The
accuracy may vary depending on the radio wave
condition of the vicinity.
2
Select [Read a Map] and press
The map of deter mined current location is
displayed.
After displaying the map, you can search for the
neighborhood information using "ｉエリア−周
辺情報−" (i-mode area –Neighbor info–). For
details about "ｉエリア−周辺情報−", see the
DoCoMo's website.
To use the location information with GPS-compatible
i-αppli software
Select [Run i appli] → software to be used.
To paste the location information to mail
Select [Paste to mail] → [Yes].
"
location URL" that has a link to the location
information is entered in the mail main body.
The location information URL being sent is
only displayed on the i-mode compatible
terminals.
.
" " flashes and the incoming
indicator flashes.
The progress of accuracy is
indicated by the bar.
To quit the Position location
Press
(Cancel).
To display the result for
identifying a location right
away
Press
(Use).
To retry the operation
Press
(Retry).
Accuracy
★ ★ ★: Nearly accurate
location information
(with an error less
than approximately
50 m)
★ ★ ☆: Relatively accurate
location information
(with an error less
than approximately
300 m)
★ ☆ ☆: Approximate
location information
(with an error more
than approximately
300 m)
.
To save the location information in the Phonebook
Select [Add to phonebook] → [New]/[Add].
Follow the same steps as in the Add to FOMA
terminal phonebook (P.95, step 3 to 6).
To add location information on an image
Select [Attach to image] → an image from My
picture of the Data Box.
●
You can add location information using the GPS
function on an image recorded by the camera
automatically (P.171).
Using the GPS-compatible
i- α ppli
You can use the location information with GPS-
compatible i-αppli software.
When you use a GPS-compatible i-αppli, the
location information is sent to the information
provider of the software being used.
When you use the GPS function with a GPS-
compatible i-αppli, set the Use location info of the
software being used to [Yes].
The method of using the location information varies
depending on the software.
1
From the Menu, select [LifeKit] → [GPS]
→ [i appli] and press
The GPS software list display appears.
2
Select a software and press
The software is started up and "
Using 地図アプリ(Map appli)
The preinstalled "地図アプリ(Map appli)"
uses the GPS function and a map to display
your current location or specified location, to
search the information on neighborhood, and
to navigate you to the destination by public
transportation, walk, or car.
An additional packet communication charge is
required for using this function. It is recommended
to use the Pake-Houdai/Pake-Houdai Full for this
software.
When you have deleted the software but you want to
restore it, download it from "ｉエリア−周辺情報−"
(i-mode area-Neighbor info-).
You cannot use this software when 2in1 is set to the
B mode because it uses mail.
Please note that DoCoMo will not guarantee any
result such as of the accuracy and immediacy of
information such as map or route.
While driving a car, please let a person other than
the driver operate it.
<i appli>
.
.
" or "
" appears.
265
Continued
Advertisement
Chapters
Table of Contents
