Sony Ericsson FOMA SO905iCS Manual page 529

List of Reasons for Disconnection
■ Packet communication
Value
27 An APN is not found or is incorrect.
30 Disconnected from the network.
33 Not signed up for packet communication.
36 Normal disconnection
■ 64K data communication
Value
1 A specified number is not found.
16 Normal disconnection
17 Cannot communicate because the other party is
already in communication status.
18 Communication was originated but no response is
returned within the specified time.
19 Cannot communicate because the recipient's
terminal is ringing.
21 The recipient rejected the call.
63 Network service and option are not enabled.
65 An invalid processing speed has been specified.
88 A call was originated to or received by a terminal
with different terminal attributes.
List of Error Reports
Numeric value indication Text indication
10 SIM not inserted
15 SIM wrong
16 incorrect password Wrong password
100 unknown
Result Codes
The result code is displayed in the text indication
format (initial value) when the ATVn command is set
to n=1 (P.27), while the result code is displayed in the
numeric value format when it is set to n=0.
■ List of result codes
Numeric value indication Text indication
0 OK
1 CONNECT
2 RING
3 NO CARRIER The line is disconnected.
4 ERROR
6 NO DIALTONE Cannot detect a dial tone.
7 BUSY
8 NO ANSWER
100 RESTRICTION The network is restricted.
101 DELAYED
Reason
Reason
Reason
UIM is not set.
SIM (IC card equivalent
to UIM) other than a
D o C o M o p r o d u c t i s
inserted.
Unknown error
Description
Normal execution
C o n n e c t e d t o t h e o t h e r
party.
There is an incoming call.
Cannot accept a command.
During the detection of a
busy tone
Connection timeout
The communication network
is congested. Retry later.
Call origination using the
redial record is restricted.
■ Extended result codes
● &E0
Displays the connection speed between the FOMA terminal
and the base station.
Numeric value indication Text indication
121 CONNECT 32000
122 CONNECT 64000
125 CONNECT 384000
133 CONNECT 3648000
● &E1
Displays the connection speed between the FOMA terminal
and a PC.
Numeric value indication Text indication
5 CONNECT 1200
10 CONNECT 2400
11 CONNECT 4800
12 CONNECT 9600
16 CONNECT 19200
17 CONNECT 38400
18 CONNECT 57600
19 CONNECT 115200
20 CONNECT 230400
21 CONNECT 460800
● The displayed communication speed, which remains only for
compatibility with a modem that has a conventional RS-232C
interface, does not indicate the actual speed because the
FOMA USB Cable with Charge Function 01/02 (optional) is
used for connection between the FOMA terminal and a PC.
■ Communication protocol result codes
Numeric value indication Text indication
1 PPPoverUD
5 PACKET
■ Example of result code indication
● When ATX0 is set
When the connection is completed, only "CONNECT" is
displayed regardless of the AT¥V command setting (P.26).
Text indication example
ATD＊99＊＊＊3#
CONNECT
● When ATX1 is set※
 When ATX1 or AT¥V0 is set
When the connection is completed, indicated in "CONNECT
<speed between the FOMA terminal and a PC>" format.
Text indication example
ATD＊99＊＊＊3#
CONNECT 460800
 When ATX1 or AT¥V1 is set※
When the connection is completed, indicated in "CONNECT <speed
between the FOMA terminal and a PC>PACKET<Host APN>/
<Highest uplink speed (FOMA terminal → base station)>/<Highest
downlink speed (FOMA terminal ← base station)>" format.
Text indication example
ATD＊99＊＊＊3#
CONNECT 460800 PACKET
mopera.net/384/3648
(Indicates that the uplink connection is made using 384kbps
maximum and the downlink connection is made using
3,648kbps maximum to mopera.net.)
※ When ATX1 and AT¥V1 are set simultaneously, the dial-up
connection may not be performed correctly. We recommend
using AT¥V0 only.
28
Connection speed
32,000bps
64,000bps
384,000bps
3,648,000bps
Connection speed
1,200bps
2,400bps
4,800bps
9,600bps
19,200bps
38,400bps
57,600bps
115,200bps
230,400bps
460,800bps
Description
64K data communication connection
Packet communication connection
Numeric value indication example
ATD＊99＊＊＊3#
1
Numeric value indication example
ATD＊99＊＊＊3#
1 21
Numeric value indication example
ATD＊99＊＊＊3#
1 21 5